Verified adjacent faucet part
Prier C-144KT-807 C-144 Rebuild Kit Guide
A focused identification record for Prier C-144KT-807, emphasizing its documented application and the physical checks that distinguish it from similar service parts.
Direct answer
Prier C-144KT-807 is a complete rebuild kit documented for Prier C-144 anti-siphon freezeless wall hydrants. The part number and the fixture's official service diagram are the fit authority; resemblance alone does not establish compatibility.
Fit facts
What identifies this match
Use these details together. One matching feature does not establish compatibility.
- Series application
- Prier C-144 anti-siphon freezeless wall hydrant
- Kit scope
- Complete rebuild kit containing the hydrant's wearing parts
- Part relationship
- Prier identifies C-144KT-807 as the C-144 rebuild kit
- Stem distinction
- A damaged operating stem requires separate overall-length identification
- Stem measurement
- Prier measures stem OAL from tip to brass tip, excluding the rubber bibb washer
- Application limit
- A C-144 rebuild-kit callout does not establish fit for another hydrant series
What this record identifies
This page identifies Prier service part C-144KT-807 as a complete rebuild kit. Its documented relationship is Prier C-144 anti-siphon freezeless wall hydrants; that is not a category-wide fit claim for every fixture carrying the brand.
A published part number is stronger evidence than color, silhouette, or a marketplace title. Begin with the fixture model and the manufacturer's exploded parts breakdown.
Interfaces and measurements that matter
For this application, record these physical facts before ordering: series application: prier c-144 anti-siphon freezeless wall hydrant; kit scope: complete rebuild kit containing the hydrant's wearing parts; part relationship: prier identifies c-144kt-807 as the c-144 rebuild kit.
Measure a retained length from the same endpoints used in the manufacturer drawing. For a connector, compare both mating ends; for a seal, compare the installed groove or seat and not merely the loose component.
- Stem distinction: A damaged operating stem requires separate overall-length identification
- Stem measurement: Prier measures stem OAL from tip to brass tip, excluding the rubber bibb washer
- Application limit: A C-144 rebuild-kit callout does not establish fit for another hydrant series
Application evidence before purchase
Use the linked Prier source to confirm that C-144KT-807 appears for the exact fixture or series. A source-backed model relationship outranks visual similarity to an uninstalled part.
If the fixture model cannot be recovered, preserve the old component's orientation and compare its markings, connection geometry, overall length where applicable, and every sealing surface. An unidentified look-alike remains unconfirmed.
Diagnosis and installation boundary
A matching brand does not make adjacent generations interchangeable. Hose couplings, stem lengths, diverter bodies, handle interfaces, and seal geometry can change while the exposed fixture remains similar.
Confirm that the leak or flow symptom originates at the mechanism this part services. Shut off the water, relieve pressure, protect the finish, and follow the fixture's service instructions before disassembly.
Questions
Before you remove or replace the part
Does C-144KT-807 fit every Prier fixture?
No. Its documented relationship is Prier C-144 anti-siphon freezeless wall hydrants. Confirm the exact model and service-diagram callout.
Is a visual match enough to order it?
No. Confirm the official part number and application, then compare the relevant connector, length, groove, or mating geometry.
What should be measured before purchase?
Use the application-specific facts: series application, kit scope, part relationship. Measure from the reference points used by the manufacturer.