Verified adjacent faucet part
Delta RP3614 Single-Handle Faucet Repair Kit
A focused identification record for Delta RP3614, emphasizing its documented application and the physical checks that distinguish it from similar service parts.
Direct answer
Delta RP3614 is a repair kit documented for Delta single-handle ball faucets whose parts diagrams specify RP3614. The part number and the fixture's official service diagram are the fit authority; resemblance alone does not establish compatibility.
Fit facts
What identifies this match
Use these details together. One matching feature does not establish compatibility.
- Kit contents
- Seats, springs, cam, packing, and O-rings
- Valve style
- Single-handle ball-faucet service parts
- Sealing interfaces
- Ball seats, cam packing, and spout seals
- Application limit
- Only models whose Delta diagram specifies RP3614
- Repair scope
- Multiple sealing and handle-control wear points
- Not included
- Replacement ball assembly
What this record identifies
This page identifies Delta service part RP3614 as a repair kit. Its documented relationship is Delta single-handle ball faucets whose parts diagrams specify RP3614; that is not a category-wide fit claim for every fixture carrying the brand.
A published part number is stronger evidence than color, silhouette, or a marketplace title. Begin with the fixture model and the manufacturer's exploded parts breakdown.
Interfaces and measurements that matter
For this application, record these physical facts before ordering: kit contents: seats, springs, cam, packing, and o-rings; valve style: single-handle ball-faucet service parts; sealing interfaces: ball seats, cam packing, and spout seals.
Measure a retained length from the same endpoints used in the manufacturer drawing. For a connector, compare both mating ends; for a seal, compare the installed groove or seat and not merely the loose component.
- Application limit: Only models whose Delta diagram specifies RP3614
- Repair scope: Multiple sealing and handle-control wear points
- Not included: Replacement ball assembly
Application evidence before purchase
Use the linked Delta source to confirm that RP3614 appears for the exact fixture or series. A source-backed model relationship outranks visual similarity to an uninstalled part.
If the fixture model cannot be recovered, preserve the old component's orientation and compare its markings, connection geometry, overall length where applicable, and every sealing surface. An unidentified look-alike remains unconfirmed.
Diagnosis and installation boundary
A matching brand does not make adjacent generations interchangeable. Hose couplings, stem lengths, diverter bodies, handle interfaces, and seal geometry can change while the exposed fixture remains similar.
Confirm that the leak or flow symptom originates at the mechanism this part services. Shut off the water, relieve pressure, protect the finish, and follow the fixture's service instructions before disassembly.
Questions
Before you remove or replace the part
Does RP3614 fit every Delta fixture?
No. Its documented relationship is Delta single-handle ball faucets whose parts diagrams specify RP3614. Confirm the exact model and service-diagram callout.
Is a visual match enough to order it?
No. Confirm the official part number and application, then compare the relevant connector, length, groove, or mating geometry.
What should be measured before purchase?
Use the application-specific facts: kit contents, valve style, sealing interfaces. Measure from the reference points used by the manufacturer.