Verified adjacent faucet part
Moen 136103 Pulldown Hose Kit Application
A focused identification record for Moen 136103, emphasizing its documented application and the physical checks that distinguish it from similar service parts.
Direct answer
Moen 136103 is a pulldown replacement hose documented for Moen pulldown kitchen faucets whose service documentation lists 136103. The part number and the fixture's official service diagram are the fit authority; resemblance alone does not establish compatibility.
Fit facts
What identifies this match
Use these details together. One matching feature does not establish compatibility.
- Part form
- Replacement pulldown hose kit
- Fixture type
- Pulldown kitchen faucet
- Connection count
- Faucet-side end and spray-wand end must both match
- Routing
- Hose follows the original path through the spout
- Application limit
- Only models listing service kit 136103
- Not included
- Spray wand and faucet cartridge
What this record identifies
This page identifies Moen service part 136103 as a pulldown replacement hose. Its documented relationship is Moen pulldown kitchen faucets whose service documentation lists 136103; that is not a category-wide fit claim for every fixture carrying the brand.
A published part number is stronger evidence than color, silhouette, or a marketplace title. Begin with the fixture model and the manufacturer's exploded parts breakdown.
Interfaces and measurements that matter
For this application, record these physical facts before ordering: part form: replacement pulldown hose kit; fixture type: pulldown kitchen faucet; connection count: faucet-side end and spray-wand end must both match.
Measure a retained length from the same endpoints used in the manufacturer drawing. For a connector, compare both mating ends; for a seal, compare the installed groove or seat and not merely the loose component.
- Routing: Hose follows the original path through the spout
- Application limit: Only models listing service kit 136103
- Not included: Spray wand and faucet cartridge
Application evidence before purchase
Use the linked Moen source to confirm that 136103 appears for the exact fixture or series. A source-backed model relationship outranks visual similarity to an uninstalled part.
If the fixture model cannot be recovered, preserve the old component's orientation and compare its markings, connection geometry, overall length where applicable, and every sealing surface. An unidentified look-alike remains unconfirmed.
Diagnosis and installation boundary
A matching brand does not make adjacent generations interchangeable. Hose couplings, stem lengths, diverter bodies, handle interfaces, and seal geometry can change while the exposed fixture remains similar.
Confirm that the leak or flow symptom originates at the mechanism this part services. Shut off the water, relieve pressure, protect the finish, and follow the fixture's service instructions before disassembly.
Questions
Before you remove or replace the part
Does 136103 fit every Moen fixture?
No. Its documented relationship is Moen pulldown kitchen faucets whose service documentation lists 136103. Confirm the exact model and service-diagram callout.
Is a visual match enough to order it?
No. Confirm the official part number and application, then compare the relevant connector, length, groove, or mating geometry.
What should be measured before purchase?
Use the application-specific facts: part form, fixture type, connection count. Measure from the reference points used by the manufacturer.