Identification matrix
Hot and Cold Cartridge Orientation Matrix
Paired cartridges may look alike yet close in opposite rotational directions. Side, rotation, markings, indexing, and handle design must be evaluated together before purchase or installation.
Direct answer
Identify hot- and cold-side stems and cartridges by combining model evidence with measured physical attributes. Compare installed left or right position, actual hot or cold supply, clockwise or counterclockwise closing motion, stem stop and handle indexing, manufacturer H/C marking, identical versus mirrored port geometry; do not order from appearance alone.
Fit facts
What identifies this match
Use these details together. One matching feature does not establish compatibility.
- Comparison attribute 1
- Installed left or right position
- Comparison attribute 2
- Actual hot or cold supply
- Comparison attribute 3
- Clockwise or counterclockwise closing motion
- Comparison attribute 4
- Stem stop and handle indexing
- Comparison attribute 5
- Manufacturer H/C marking
- Comparison attribute 6
- Identical versus mirrored port geometry
Record this attribute from the installed fixture or removed part, then confirm it in a source-backed application listing.
Record this attribute from the installed fixture or removed part, then confirm it in a source-backed application listing.
Record this attribute from the installed fixture or removed part, then confirm it in a source-backed application listing.
Record this attribute from the installed fixture or removed part, then confirm it in a source-backed application listing.
Record this attribute from the installed fixture or removed part, then confirm it in a source-backed application listing.
Record this attribute from the installed fixture or removed part, then confirm it in a source-backed application listing.
What this matrix can establish
Paired cartridges may look alike yet close in opposite rotational directions. Side, rotation, markings, indexing, and handle design must be evaluated together before purchase or installation.
Use the matrix to narrow candidates and organize evidence. Final selection requires a documented application to the installed model or a complete agreement of functional geometry, dimensions, orientation, and retention details.
- Compare installed left or right position.
- Compare actual hot or cold supply.
- Compare clockwise or counterclockwise closing motion.
- Compare stem stop and handle indexing.
- Compare manufacturer H/C marking.
- Compare identical versus mirrored port geometry.
Start with the fixture and system
Classify the fixture as two-handle faucets and document the complete hot- and cold-side stems and cartridges arrangement before focusing on one removable piece. The surrounding body, trim, supplies, outlets, and control functions provide context that a loose part cannot.
Search official support material using model numbers and markings exactly as found. A collection name, finish code, or visual match can help locate documentation, but none substitutes for the parts diagram for the correct generation.
- Photograph the fixture in place from wide and close views.
- Preserve labels, stamped characters, casting marks, and production codes.
- Record what each handle, outlet, hose, or valve actually does.
Measurement workflow
Isolate the water supply and relieve pressure before disassembly. Keep components in removal order and use a ruler in overview photographs, then use calipers or a thread gauge for decision-making dimensions.
State the measurement reference points. For example, distinguish overall length from shoulder-to-tip length and outside diameter from diameter across spline peaks. Repeating a measurement catches tilted calipers and worn surfaces.
- Trace the supply tubes rather than assuming the current installation follows the usual left-hot layout.
- Mark each cartridge by physical valve position before removal.
- Viewed from a stated direction, record the turn used to open and close each stem.
- Compare letters, colors, tabs, stops, and part numbers to the manufacturer's instructions.
Build a defensible comparison
Create one row per candidate and one column for each observed attribute: installed left or right position, actual hot or cold supply, clockwise or counterclockwise closing motion, stem stop and handle indexing, manufacturer H/C marking, identical versus mirrored port geometry. Mark an attribute unknown when it cannot be observed; do not convert missing evidence into a match.
Reject a candidate when a functional feature conflicts, even if several dimensions are close. Give greater weight to exact model documentation, unique retention and port geometry, and clearly defined measurements than to color, finish, or silhouette.
- Exact documented application is stronger than visual similarity.
- Functional conflicts outweigh cosmetic resemblance.
- Every dimension needs units and named reference points.
- A complete match includes the seals and retaining hardware, not only the central part.
Compatibility before purchase
Confirm the manufacturer, fixture model, and production range whenever those records are available. Then verify that the candidate preserves the installed control function, orientation, water path, sealing surfaces, and mechanical retention.
Read the current package contents and installation instructions. Reused product names, revised assemblies, and superseded numbers can change which adapters or companion components are required.
- Match the official application or model range.
- Compare all critical dimensions and ports.
- Verify hot/cold, opening direction, and indexing where relevant.
- Confirm seals, clips, nuts, adapters, and tools are included or separately available.
Common identification traps
Most incorrect selections begin with one attractive clue: a familiar handle, a close length, a matching spline count, or a seller photo. Treat each as one observation in a larger evidence set.
If evidence conflicts, pause and recheck the model and measurement datum. Forcing a near-match can damage threads, seals, trim, or the installed valve body.
- Left/right and hot/cold are not equivalent when supplies have been crossed.
- Rotation descriptions are ambiguous unless the viewing direction is stated.
- A cartridge that installs physically may make lever handles point or operate incorrectly.
Document the decision
Save photographs of the installed orientation, removed component, markings, and measurement setup with the manufacturer diagram or application page used for confirmation. This record makes later service faster and shows which facts supported the selection.
After installation, follow the manufacturer's procedure for flushing, limit-stop adjustment, calibration, and leak inspection as applicable. A part that physically seats still needs correct operation and sealing to be considered a successful repair.
- Record the ordered part number and package revision.
- Retain the old part until function and leak checks are complete.
- Update the fixture record if a documented supersession or conversion was installed.
Questions
Before you remove or replace the part
Can appearance alone identify the correct part?
No. Appearance can narrow a search, but selection should be confirmed with model documentation plus the relevant dimensions, ports, orientation, seals, and retention features.
Which measurement should I take first?
Begin with the complete hot- and cold-side stems and cartridges context, then measure from clearly named shoulders or surfaces. The most decisive measurement depends on which candidate attributes differ.
What should I do when two candidates look equally close?
Look for a decisive functional difference such as port layout, locating tabs, thread pitch, opening direction, retention method, or a source-backed model range. Do not force either candidate if the conflict remains unresolved.
Does a matching brand guarantee compatibility?
No. Manufacturers use multiple valve and part generations. Confirm the exact model, production range, and current service-part relationship.
Reference trail